Ullrich Logo
Sheet, Plate & Rollformed Aluminium
Rolled Aluminium Products, Sheet Metal, Plate Metal and Rollformed Metal

WinterLite™ Privacy and Sunlight Control Panels

Claddings and Sidings

Winterlite™ is a contoured mesh profile designed to provide effective visual privacy and year round sunlight control in awnings, pergolas and fence panels and vertical privacy screen applications. The powder coated, lightweight aluminium panels offer easy installation, good appearance and low maintenance. A range of powder coated colours are selected to provide architectural uniformity with contemporary roof finishes.

Winterlite Privacy and Sunlight Control Panels

Dimensions Profile side elevation
Cover 760mm Sheet Width 800mm
Winterlite Privacy and sunlight control
Thickness 0.70mm Sheet Lengths 2000, 3000 and 4000mm

Sheet Cover
1 800 6 4600
2 1560 7 5360
3 2320 8 6120
4 3080 9 6880
5 3840 10 7640

Fastener Locations
5 Tek screw fasteners per panel per rafter
Winterlite Privacy and sunlight control panels
Screw fasteners are fixed with a neoprene washer and may require a profiled metal washer in some situations. Multiple sheet installations require pop-riveted sheet jointing (see Panel Jointing Detail). To ensure fastener durability is at least equal to the durability of the sheet product, and for full details of installation procedures, contact Ullrich Technical Support.
Screw for timber rafters Screw for steel rafters Aluminium-stem pop-rivet
12g TYPE 17
SCREW FOR
TlMBER RAFTERS
12g SELF-DRILLING
TEK SCREW FOR
STEEL RAFTERS
3.2 DIA x 6.4 GRIP-LENGTH
ALUMINIUM-STEM
POP-RIVET

Privacy and Sunlight Control Panels Materials Ordering

  1. Calculate number of sheets required using the Sheet Cover information.
  2. Calculate length of end capping required to cover open edges of perimeter of installation.
  3. Calculate the number of fastenings at 5 fastenings per panel width at each rafter.
    (a) For timber rafters, specify 12g x 65mm Type 17 screws at panel ends and 12g x 25mm Type 17 screws for intermediate fixings, OR
    (b) For steel rafters, specify 12g x 65mm self-drilling Tek screws at panel ends and 12g x 20mm Tek screws for intermediate fixings.
  4. Multiple panel installations require a 15mm overlap at end joints, and 40mm overlap at side joints, fixed with 3.2 dia x 6.4 grip-length pop-rivets as illustrated:
Joint detail - Panel Ends Joint detail - Panel Sides
WinterLite joint detail - panel ends WinterLite joint detail - panel sides
Panel Cutting Detail - across Panel Cutting Detail - along
WinterLite panel cutting detail - across WinterLite panel cutting detail - along

Installation Guidelines

  1. Install WinterLiteTM panels using the recommended fasteners, fastener spacings, cutting guidelines and panel jointing techniques.
  2. Predrill panels with 6mm dia holes for screw fixing.
  3. Fix intermediate screws through the trough of the profile at the same angle as the profile.
  4. Fix panel ends vertically through edge capping.
  5. Avoid panel end joints at mid-span and plan for joins at rafters where possible.
  6. Fit edge capping to open edges of perimeter of installation and fasten at each rafter contact, through the edge capping profile and the WinterLiteTM panel.

Important Information

  • WinterLiteTMTM is designed as a covering, not a structural roofing material, and should not be walked on. Where effective sunlight control is important in eg: pergola and awning applications, ensure that arrow indicators on panels face north. CAUTION: Cut edges can be sharp.
  • All dimensions shown in mm.
  • Diagrams are schematic and not intended as specification drawings.

WinterLite™ colours - White, Heritage Green, Primrose, Ranch Brown, Bronze Olive and Heritage Red.

 
New Zealand / International Sales
Visit www.ullrich.co.nz
Phone: 0800 500 338 (Within NZ)
Email: general enquiry form
Orders: order form
Ullrich Aluminium Australian Aluminium Council Ltd
Australia
Visit www.ullrich.com.au
Phone: 1300 650 075 (Within AU)
Email: general enquiry form
Orders: order form
 

Aluminium Castings - Aluminium Extrusions - Aluminium Finishes - Aluminium Ladders, Commercial - Building Products Division - Cladding, Wintec UlltraClad® - Decorative Metals - Download Brochures - Extruded Aluminium Bends - Fabricated Aluminium - Fasteners - Machinery, Tekna - Marine Products - Sheet, Plate & Rollformed Aluminium - Welding Products - Wintec UlltraClad® Cladding -

Company Profile - Contact Details - Sales Centres - News - Specials - Interesting Links - Home - TOP