Sheet Plate and Rollformed Metal Products
Technical Data on Flat and Coiled Aluminium Sheets Aluminium Flat and Coiled Standard Tolerances - data
|Definitions used in this Web Manual|
|Sheet||A rolled rectangular section of thickness over 0.15mm and to 6.0mm, with sheared, slit or sawn edges.|
|Plate||A rolled rectangular section of thickness greater than 6mm, with either sheared or sawn edges.|
|Alclad Sheet||A composite sheet having, on both surfaces, a metallurgically bonded aluminium or aluminium alloy coating which is anodic to the core alloy to which it is bonded, thus electrolytically protecting the core alloy against corrosion. Alclad on-side sheet has been treated on one surface only.|
While all care has been taken in the production of this Web Manual, Ullrich aluminium Co Ltd does not accept responsibility for any inaccuracy or errors contained therein. Ullrich Aluminium Co Ltd cannot therefore be responsible for its accuracy or correctness. the information and values are intended only as a general guide to performance and suitability for application. Nothing herein contained shall constitute a warranty that any product is specifically suitable for a particular purpose. data is not intended for design.
Aluminium Castings - Aluminium Extrusions - Aluminium Finishes - Aluminium Ladders, Commercial - Building Products Division - Cladding, UlltraClad® - Decorative Metals - Download Brochures - Extruded Aluminium Bends - Manufactured Al Products - Fasteners - Marine Products - Sheet, Plate & Rollformed Aluminium - Welding Products - UlltraClad® Cladding -